Thanks, Josh for posting this video. Not only is it informative, but it’s funny too! Right around the 1 minute mark.. bahahahah. Good job man.
For wrapping hoods, you are going to need some plastic sheeting. I use 1.5 MIL, 8’4″ x 200′ and it can be picked up at your local Sherwin Williams store usually for somewhere around $20/ roll.
You’re also going to need some clamps, maybe some magnets to hang the plastic. In the clip above, Josh shows how to double the plastic up and he uses clamps at the bottom to attach it to the bottom for a water tight hold. The water is forced away from the hood, down into the bucket or drain on floor.
“No water on the ground, no water on the ground; not looking like a fool with water on the ground” – Josh. Bahahah.. Thanks for the video.
Subscribe to this blog's RSS feed
